Personalised Wall Art

Display made easy: the practical sawtooth hanger on the back makes hanging up your wall art fast and easy. There is a suitable hanger for each image format, which can be fastened on the back to both the short and long edge of the image. Immediately after delivery, you can proudly display your photo, professionally mounted on wood and in your choice or portrait or landscape format.

This subtle Aluminium Rail rear mounted wall hanger is particularly common in exhibitions and galleries. The rail is mounted to the back side of your picture with a distance from the wall of about 10 mm. The effect is that the picture seems to float in front of the wall and the image remains unaffected. Note: Aluminium Rail system is mounted at the factory on the reverse side and runs around all 4 sides. Available for Aluminium Prints, Gallery Prints and Foam Board Prints. It is not available on Acrylic Prints.

Our Chrome Stand-Offs give you the freedom to choose the mounting points for your wall art piece. There are no drill holes into your product so the image is unaffected and can deliver the full effect. To affix, mark the position of the 4 stand-offs and drill compatible holes in your wall. Screws are affixed from the front to the screw heads remain visible (wall plugs and screws supplied). Finally, fasten the head of the stand-off into mounted anchor. Note: Wall art piece will sit 20mm away from the wall. Available for Aluminium, Acrylic, Gallery and Foam Board Prints.

With our Chrome Posts, we drill the holes for the posts in each of the four corners of your chosen wall art piece at the factory. All you need to do is mark the position of the posts and drill compatible holes in your wall. Screws are affixed from the front so the screw heads remain visible (screw & wall plugs supplied). To finish, simply fasten the head of the post into mounted anchor. Note: Wall art piece will sit 20 mm away from the wall. Available for Aluminium Prints, Acrylic Prints, Gallery Prints and Foam Board Prints.